干旱区生态环境知识资源中心(Arid): Environmental hazard assessment of industrial and municipal waste materials with the applications of RES2-D method and 3-D Oasis Montaj modeling: A case study at Kepong, Kuala Lumpur, Peninsula Malaysia

Arid

DOI	10.1016/j.jhazmat.2020.124282
	Environmental hazard assessment of industrial and municipal waste materials with the applications of RES2-D method and 3-D Oasis Montaj modeling: A case study at Kepong, Kuala Lumpur, Peninsula Malaysia
	Arifin, Mohd Hariri; Kayode, John Stephen; Ismail, Muhammad Khairel Izzuan; Abdullah, Abdul Manan; Embrandiri, Asha; Nazer, Nor Shahidah Mohd; Azmi, Azrin
通讯作者	Kayode, JS (corresponding author), Univ Teknol PETRONAS, Inst Hydrocarbon Recovery, Dept Res & Innovat, Shale Gas Res Grp,Persiaran UTP, Iskandar 32610, Perak Darul Rid, Malaysia.
来源期刊	JOURNAL OF HAZARDOUS MATERIALS
ISSN	0304-3894
EISSN	1873-3336
出版年	2021
卷号	406
英文摘要	Environmental hazards, industrial, and municipal wastes geochemical and geophysical assessments were carried out at an industrial waste disposal (IWD) site at Bukit Kepong, Kuala Lumpur, Malaysia. RES2-D geophysical method was applied, capable of identification and quantification of the industrial wastes; buried hazardous materials (BHM) and their effects on the subsurface stratum, from the moderately saturated zones, to fully saturated zones housing the aquifer units underneath the water table. Six RES2-D survey profiles were respectively acquired along E-W, and N-S directions. The perpendicular arrangement of the RES2-D survey lines, was tenaciously designed to make possible, the industrial waste materials (IWM)and municipal solid waste (MSW) quantification, with sufficient length of survey lines set at 200 m, and electrode spacing of 5 m, to cover as much details segments of the IWM and MSW as possible. The six RES2-D inversion results, helped in the subsurface stratum classification into three layers, namely; soft layers, which encompasses the waste materials, with varied resistivity values i.e., 0-100 Omega-m, at 10-15 m depths. The consolidated layers produced varied resistivity values i.e., 101-400 Omega-m, at 15-20 m depths. The bedrock has the highest resistivity values i.e., 401-2000 Omega-m, at depths > 20 m. The estimated volume of the waste materials was 312,000 m(-3), using 3-D Oasis Montaj modeling via rectangular prism model generated from the inverted RES2-D. Results from the geochemical analysis helped in the validation of the site as a potential contaminated zone with severe health effects.
英文关键词	Environmental hazard assessment Industrial and municipal wastes characterization Depth and volume of the waste materials Kepong Kuala Lumpur Peninsula Malaysia
类型	Article
语种	英语
开放获取类型	hybrid
收录类别	SCI-E
WOS记录号	WOS:000613414300001
WOS类目	Engineering, Environmental ; Environmental Sciences
WOS研究方向	Engineering ; Environmental Sciences & Ecology
资源类型	期刊论文
条目标识符	http://119.78.100.177/qdio/handle/2XILL650/350850
作者单位	[Arifin, Mohd Hariri; Nazer, Nor Shahidah Mohd; Azmi, Azrin] Univ Kebangsaan Malaysia, Fak Sains & Teknol, Pusat Sains Bumi & Alam Sekitar, Program Geol, Bangi 43600, Selangor, Malaysia; [Kayode, John Stephen] Univ Teknol PETRONAS, Inst Hydrocarbon Recovery, Dept Res & Innovat, Shale Gas Res Grp,Persiaran UTP, Iskandar 32610, Perak Darul Rid, Malaysia; [Ismail, Muhammad Khairel Izzuan; Abdullah, Abdul Manan] Geo Technol Resources SDN BHD, 31-1 Jalan Mawar 5B, Sepang 43900, Selangor, Malaysia; [Embrandiri, Asha] Wollo Univ, Coll Med & Hlth Sci, Dept Environm Hlth, POB 1145, Dessie, Amhara, Ethiopia
推荐引用方式 GB/T 7714	Arifin, Mohd Hariri,Kayode, John Stephen,Ismail, Muhammad Khairel Izzuan,et al. Environmental hazard assessment of industrial and municipal waste materials with the applications of RES2-D method and 3-D Oasis Montaj modeling: A case study at Kepong, Kuala Lumpur, Peninsula Malaysia[J],2021,406.
APA	Arifin, Mohd Hariri.,Kayode, John Stephen.,Ismail, Muhammad Khairel Izzuan.,Abdullah, Abdul Manan.,Embrandiri, Asha.,...&Azmi, Azrin.(2021).Environmental hazard assessment of industrial and municipal waste materials with the applications of RES2-D method and 3-D Oasis Montaj modeling: A case study at Kepong, Kuala Lumpur, Peninsula Malaysia.JOURNAL OF HAZARDOUS MATERIALS,406.
MLA	Arifin, Mohd Hariri,et al."Environmental hazard assessment of industrial and municipal waste materials with the applications of RES2-D method and 3-D Oasis Montaj modeling: A case study at Kepong, Kuala Lumpur, Peninsula Malaysia".JOURNAL OF HAZARDOUS MATERIALS 406(2021).