Knowledge Resource Center for Ecological Environment in Arid Area
DOI | 10.32604/jrm.2020.011327 |
Component Optimization and Seepage Simulation Method of Resin Based Permeable Brick | |
Wang, Xiaofu1; Zhang, Xiong1; He, Yan2; Lian, Chunming3 | |
通讯作者 | Wang, Xiaofu |
来源期刊 | JOURNAL OF RENEWABLE MATERIALS
![]() |
ISSN | 2164-6325 |
EISSN | 2164-6341 |
出版年 | 2020 |
卷号 | 8期号:8页码:947-968 |
英文摘要 | In order to solve the problem of urban surface runoff, it is necessary to study permeable brick deeply. Tensile test and DMA test were used to study the binder material of permeable brick, and a material with the best mechanical properties was selected as the binder of resin based permeable brick; The permeable brick with single gradation and continuous gradation and porosity of 0.1-0.5 gradient is constructed by 3D modeling method. The particle composition and the seepage simulation results of permeable brick under different design parameters were analyzed; A resin-based permeable brick with micro-pores was prepared using the selected binder and desert sand with high roundness as aggregate, and compared with the simulation, its water permeability coefficient is 3.25 x 10(-2) cm/s and the compressive strength is 36.19 MPa. In the seepage simulation of permeable brick, it is known that with the increase of gradation width value i, the water permeability coefficient increases. Therefore, in order to control the number of aggregate particles and obtain better seepage performance, the wide gradation of i >= 4 and the design porosity of 0.3-0.4 should be considered. This study provides a research basis and a simulation method for the component optimization of resin based permeable brick. |
英文关键词 | Permeable brick epoxy resin aggregate sponge city |
类型 | Article |
语种 | 英语 |
国家 | Peoples R China |
开放获取类型 | hybrid |
收录类别 | SCI-E |
WOS记录号 | WOS:000549493600008 |
WOS关键词 | DARCY-BRINKMAN-FORCHHEIMER ; PORTLAND-CEMENT ; URBAN ; CORROSION ; FLOW ; URBANIZATION ; CONVECTION ; POLYMERS ; RUNOFF ; IMPACT |
WOS类目 | Green & Sustainable Science & Technology ; Materials Science, Composites ; Polymer Science |
WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Polymer Science |
资源类型 | 期刊论文 |
条目标识符 | http://119.78.100.177/qdio/handle/2XILL650/319673 |
作者单位 | 1.Tongji Univ, Key Lab Adv Civil Engn Mat, Educ Minist, Sch Mat Sci & Technol, Shanghai 201804, Peoples R China; 2.Suzhou Univ Sci & Technol, Sch Civil Engn, Suzhou 215011, Peoples R China; 3.China Construct Eighth Engn Bur Co Ltd, Shanghai 200122, Peoples R China |
推荐引用方式 GB/T 7714 | Wang, Xiaofu,Zhang, Xiong,He, Yan,et al. Component Optimization and Seepage Simulation Method of Resin Based Permeable Brick[J],2020,8(8):947-968. |
APA | Wang, Xiaofu,Zhang, Xiong,He, Yan,&Lian, Chunming.(2020).Component Optimization and Seepage Simulation Method of Resin Based Permeable Brick.JOURNAL OF RENEWABLE MATERIALS,8(8),947-968. |
MLA | Wang, Xiaofu,et al."Component Optimization and Seepage Simulation Method of Resin Based Permeable Brick".JOURNAL OF RENEWABLE MATERIALS 8.8(2020):947-968. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。