干旱区生态环境知识资源中心(Arid): Improvement of Extracted Power of Pole Mounted Solar Panels by Effective Cooling Using Aluminum Heat Sink under Hot Weather and Variable Wind Speed Conditions

Arid

DOI	10.3390/en13123159
	Improvement of Extracted Power of Pole Mounted Solar Panels by Effective Cooling Using Aluminum Heat Sink under Hot Weather and Variable Wind Speed Conditions
	Hassan, Youssef 1,2; Orabi, Mohamed 1; Alshreef, Abdulaziz 2; M. Al-Rabghi, Omar 3; Habeebullah, Badr A.3; El Aroudi, Abdelali 4; A. Ismeil, Mohamed 1,5
通讯作者	El Aroudi, Abdelali
来源期刊	ENERGIES
EISSN	1996-1073
出版年	2020
卷号	13 期号:12
英文摘要	The increase in operating temperature of PV generators leads to degradation of their performance. These adverse effects of high temperatures are considered as one of the most important problems that solar panel operation faces in hot weather areas. A lot of research has been undertaken to study this aspect and find ways of limiting the harm caused by such high temperatures. To overcome this harm and to maintain the operating temperature of the PV cells within the optimum range specified by manufacturers, cooling the solar panels often becomes indispensable. This paper discusses the heat transfer through the solar panel layers and studies the effect of high temperature on the solar panel performance in a hot desert environment. It also presents the development of a new solar panel structure viz. by installing an aluminum heat sink to reduce the effect of temperature rise and thus improve the solar panel performance. The study focuses on a pole-mounted solar panel for a street lighting apparatus in extremely hot desert conditions with fluctuating wind speeds. It will be shown that adding an aluminum heat sink to the solar panel bottom mitigates the effect of increased temperature and hence modifies the solar panel operating point by increasing both the efficiency and the lifetime. The solar cell temperature is decreased by 16.4% as a result of the aluminum heat sink installation on the solar panel back sheet and consequently, the accumulated energy produced by the the solar panel is increased by 13.23% per day.
英文关键词	solar panel performance photovoltaic (PV) cell heat sink back surface cooling of photovoltaic panel solar panel and excessive heat
类型	Article
语种	英语
国家	Egypt ; Saudi Arabia ; Spain
开放获取类型	gold
收录类别	SCI-E
WOS记录号	WOS:000550166700001
WOS关键词	TEMPERATURE ; PERFORMANCE ; EFFICIENCY ; RADIATION
WOS类目	Energy & Fuels
WOS研究方向	Energy & Fuels
资源类型	期刊论文
条目标识符	http://119.78.100.177/qdio/handle/2XILL650/319494
作者单位	1.Aswan Univ, Aswan Power Elect Applicat Res Ctr APEARC, Fac Engn, Aswan 81542, Egypt; 2.King Abdulaziz Univ, Dept Elect & Comp Engeneering, POB 80204, Jeddah 21589, Saudi Arabia; 3.King Abdulaziz Univ, Dept Mech Engeneering, POB 80204, Jeddah 21589, Saudi Arabia; 4.Univ Rovira & Virgili, Dept Engn Elect, Elect & Automat, Tarragona 43007, Spain; 5.South Valley Univ, Fac Engn, Qena 83523, Egypt
推荐引用方式 GB/T 7714	Hassan, Youssef,Orabi, Mohamed,Alshreef, Abdulaziz,et al. Improvement of Extracted Power of Pole Mounted Solar Panels by Effective Cooling Using Aluminum Heat Sink under Hot Weather and Variable Wind Speed Conditions[J],2020,13(12).
APA	Hassan, Youssef.,Orabi, Mohamed.,Alshreef, Abdulaziz.,M. Al-Rabghi, Omar.,Habeebullah, Badr A..,...&A. Ismeil, Mohamed.(2020).Improvement of Extracted Power of Pole Mounted Solar Panels by Effective Cooling Using Aluminum Heat Sink under Hot Weather and Variable Wind Speed Conditions.ENERGIES,13(12).
MLA	Hassan, Youssef,et al."Improvement of Extracted Power of Pole Mounted Solar Panels by Effective Cooling Using Aluminum Heat Sink under Hot Weather and Variable Wind Speed Conditions".ENERGIES 13.12(2020).