干旱区生态环境知识资源中心(Arid): Balance of Plant System Analysis and Component Design of Turbo-Machinery for High Temperature Gas Reactor Systems

Arid

DOI	10.2172/828709
来源ID	OSTI_ID: 828709
	Balance of Plant System Analysis and Component Design of Turbo-Machinery for High Temperature Gas Reactor Systems
	Ballinger, Ronald G. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)]; Wang, Chun Yun [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)]; Kadak, Andrew [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)]; Todreas, Neil [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)]; Mirick, Bradley [Concepts, Northern Engineering and Research, Woburn, MA (United States)]; Demetri, Eli [Concepts, Northern Engineering and Research, Woburn, MA (United States)]; Koronowski, Martin [Concepts, Northern Engineering and Research, Woburn, MA (United States)]
英文摘要	The Modular Pebble Bed Reactor system (MPBR) requires a gas turbine cycle (Brayton cycle) as the power conversion system for it to achieve economic competitiveness as a Generation IV nuclear system. The availability of controllable helium turbomachinery and compact heat exchangers are thus the critical enabling technology for the gas turbine cycle. The development of an initial reference design for an indirect helium cycle has been accomplished with the overriding constraint that this design could be built with existing technology and complies with all current codes and standards. Using the initial reference design, limiting features were identified. Finally, an optimized reference design was developed by identifying key advances in the technology that could reasonably be expected to be achieved with limited R&D. This final reference design is an indirect, intercooled and recuperated cycle consisting of a three-shaft arrangement for the turbomachinery system. A critical part of the design process involved the interaction between individual component design and overall plant performance. The helium cycle overall efficiency is significantly influenced by performance of individual components. Changes in the design of one component, a turbine for example, often required changes in other components. To allow for the optimization of the overall design with these interdependencies, a detailed steady state and transient control model was developed. The use of the steady state and transient models as a part of an iterative design process represents a key contribution of this work. A dynamic model, MPBRSim, has been developed. The model integrates the reactor core and the power conversion system simultaneously. Physical parameters such as the heat exchangers; weights and practical performance maps such as the turbine characteristics and compressor characteristics are incorporated into the model. The individual component models as well as the fully integrated model of the power conversion system have been verified with an industry-standard general thermal-fluid code Flownet. With respect to the dynamic model, bypass valve control and inventory control have been used as the primary control methods for the power conversion system. By performing simulation using the dynamic model with the designed control scheme, the combination of bypass and inventory control was optimized to assure system stability within design temperature and pressure limits. Bypass control allows for rapid control system response while inventory control allows for ultimate steady state operation at part power very near the optimum operating point for the system. Load transients simulations show that the indirect, three-shaft arrangement gas turbine power conversion system is stable and controllable. For the indirect cycle the intermediate heat exchanger (IHX) is the interface between the reactor and the turbomachinery systems. As a part of the design effort the IHX was identified as the key component in the system. Two technologies, printed circuit and compact plate-fin, were investigated that have the promise of meeting the design requirements for the system. The reference design incorporates the possibility of using either technology although the compact plate-fin design was chosen for subsequent analysis. The thermal design and parametric analysis with an IHX and recuperator using the plate-fin configuration have been performed. As a three-shaft arrangement, the turbo-shaft sets consist of a pair of turbine/compressor sets (high pressure and low pressure turbines with same-shaft compressor) and a power turbine coupled with a synchronous generator. The turbines and compressors are all axial type and the shaft configuration is horizontal. The core outlet/inlet temperatures are 900/520 C, and the optimum pressure ratio in the power conversion cycle is 2.9. The design achieves a plant net efficiency of approximately 48%.
出版年	2004
报告类型	Technical Report
语种	英语
国家	美国
来源学科分类	11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS ; 21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS ; CONTROL SYSTEMS ; DESIGN ; EFFICIENCY ; GAS TURBINES ; HEAT EXCHANGERS ; HELIUM ; OPTIMIZATION ; PARAMETRIC ANALYSIS ; PEBBLE BED REACTORS ; PRINTED CIRCUITS ; REACTOR CORES ; TURBINES ; TURBOMACHINERY BRAYTON CYCLE, TURBO-MACHINERY, HIGH TEMPERATURE GAS REACTOR
URL	http://www.osti.gov/scitech/servlets/purl/828709
资源类型	科技报告
条目标识符	http://119.78.100.177/qdio/handle/2XILL650/268776
推荐引用方式 GB/T 7714	Ballinger, Ronald G. [Massachusetts Inst. of Technology ,Wang, Chun Yun [Massachusetts Inst. of Technology ,Kadak, Andrew [Massachusetts Inst. of Technology ,et al. Balance of Plant System Analysis and Component Design of Turbo-Machinery for High Temperature Gas Reactor Systems,2004.