干旱区生态环境知识资源中心(Arid): Coaxial extrusion conversion concept for polymeric flat plate solar collectors. Final technical report, September 30, 1978-December 31, 1979

Arid

DOI	10.2172/5064769
报告编号	DOE/CS/32241-1
来源ID	OSTI_ID: 5064769
	Coaxial extrusion conversion concept for polymeric flat plate solar collectors. Final technical report, September 30, 1978-December 31, 1979
	Rhodes, R.O.; Chapman, N.J.; Chao, K.C.; Sorenson, K.F.
英文摘要	This study investigated materials and processes for fundamental improvements in flat-plate solar collector cost and performance. The goal was to develop a process for direct conversion of inexpensive raw materials into a completed solar collector unit, without labor intensive assembly operations. It was thought that materials carefully matched to the process and end-use environment would substantially reduce collector costs, as compared to conventional industry practice. The project studied the feasibility of a cost-effective, glazed solar collector, with low labor input, utilizing a coaxial extrusion of compatible polymeric materials. This study evaluated all considered materials for the desired application. In addition, there was a trial extrusion of the leading candidate glazing and absorber materials, which resulted in successfully performing a coaxial extrusion of one cell. At the time the study was conducted, there were no materials available that met the necessary requirements for the specified utilization. It was recommended that, if potentially compatible materials become available, further investigation into the suitability of those materials be researched. Then, if a suitable material was found, proceeding into Phase II would be recommended.
出版年	1980
报告类型	Technical Report
语种	英语
国家	美国
来源学科分类	14 SOLAR ENERGY ; 36 MATERIALS SCIENCE ; FLAT PLATE COLLECTORS ; FABRICATION ; MATERIALS ; POLYMERS ; EXTRUSION ; PHYSICAL PROPERTIES ; AGING ; COMPUTER CALCULATIONS ; COST ; DATA ; DESIGN ; FLOW RATE ; GLAZING MATERIALS ; GRAPHS ; MATHEMATICAL MODELS ; MECHANICAL PROPERTIES ; MOISTURE ; PERFORMANCE ; PLASTICS ; POLYCARBONATES ; POLYURETHANES ; SOLAR ABSORBERS ; STAGNATION ; STRESSES ; TABLES ; TENSILE PROPERTIES ; ULTRAVIOLET RADIATION ; WEATHERING ; CARBON COMPOUNDS ; CARBONATES ; DATA FORMS ; ELECTROMAGNETIC RADIATION ; EQUIPMENT ; INFORMATION ; MATERIALS WORKING ; ORGANIC COMPOUNDS ; ORGANIC POLYMERS ; OXYGEN COMPOUNDS ; PETROCHEMICALS ; PETROLEUM PRODUCTS ; POLYAMIDES ; RADIATIONS ; SOLAR COLLECTORS ; SOLAR EQUIPMENT 141000* -- Solar Collectors & Concentrators ; 360401 -- Polymers & Plastics-- Preparation & Fabrication-- (-1987) ; 360403 -- Materials-- Polymers & Plastics-- Mechanical Properties-- (-1987) ; 360404 -- Materials-- Polymers & Plastics-- Physical Properties-- (-1987)
URL	http://www.osti.gov/scitech/servlets/purl/5064769
资源类型	科技报告
条目标识符	http://119.78.100.177/qdio/handle/2XILL650/259917
推荐引用方式 GB/T 7714	Rhodes, R.O.,Chapman, N.J.,Chao, K.C.,et al. Coaxial extrusion conversion concept for polymeric flat plate solar collectors. Final technical report, September 30, 1978-December 31, 1979,1980.