Knowledge Resource Center for Ecological Environment in Arid Area
固结粉胶凝材料开发与胶结充填体强度试验 | |
其他题名 | Development of consolidation powder cementing material and strength test of cemented filling body |
杨志强1; 高谦2; 陈得信3; 王永定3; 何建元3 | |
来源期刊 | 河海大学学报. 自然科学版
![]() |
ISSN | 1000-1980 |
出版年 | 2017 |
卷号 | 45期号:1页码:69-76 |
中文摘要 | 针对金川矿山开采面临的采矿经济与环保压力,利用酒钢低活性酸性矿渣,开展新型充填胶凝材料开发,获得称为固结粉的早强型新型充填胶凝材料。为了实现固结粉在金川矿山工业化应用,针对金川矿山废石、棒磨砂、戈壁砂和河沙等骨料,开展了4种充填骨料的固结粉胶结充填体抗压强度试验。结果表明,除了戈壁粗砂骨料胶结充填体3 d抗压强度小于设计抗压强度外,其他3种充填骨料的固结粉胶结充填体抗压强度均满足金川矿山安全采矿要求,说明早强型固结粉胶凝材料应用于金川矿山充填法采矿中能够替代水泥。 |
英文摘要 | Considering economic and environmental pressure in mining in Jinchuan City,development of a new filling cementing material was carried out using acid slag with low activity at the Jiugang Company,and an early-strength filling cementing material,called consolidation powder,was obtained. In order to use the consolidation power in Jinchuan Mine,compressive strength tests on consolidation powder were carried out for four kinds of filling aggregates,including waste rock,rod milling sand,Gobi Desert sand,and river sand. The results show that the compressive strength of the cemented filling body of Gobi Desert sand for a curing period of three days is lower than the design compressive strength,and the compressive strength of the cemented filling bodies of the three other kinds of filling aggregates meet the strength requirements of a filling body for safe mining in Jinchuan Mine,indicating that the early-strength consolidation powder filling cementing material can replace cement for filling mining in Jinchuan Mine. |
中文关键词 | 固结粉胶凝材料 ; 低活性酸性矿渣 ; 胶结充填体抗压强度试验 ; 固体废弃物利用 ; 矿山充填采矿法 ; 金川镍矿 |
英文关键词 | consolidation powder cementing material low-activity acid slag compressive strength test on cementing filling body utilization of solid waste filling mining method Jinchuan nickel mine |
语种 | 中文 |
国家 | 中国 |
收录类别 | CSCD |
WOS类目 | MINING MINERAL PROCESSING |
WOS研究方向 | Mining & Mineral Processing |
CSCD记录号 | CSCD:5928330 |
资源类型 | 期刊论文 |
条目标识符 | http://119.78.100.177/qdio/handle/2XILL650/236151 |
作者单位 | 1.北京科技大学土木与环境工程学院, 镍钴资源综合利用国家重点实验室, 北京 100083, 中国; 2.北京科技大学土木与环境工程学院, 北京 100083, 中国; 3.金川集团股份有限公司, 镍钴资源综合利用国家重点实验室, 金昌, 甘肃 737100, 中国 |
推荐引用方式 GB/T 7714 | 杨志强,高谦,陈得信,等. 固结粉胶凝材料开发与胶结充填体强度试验[J],2017,45(1):69-76. |
APA | 杨志强,高谦,陈得信,王永定,&何建元.(2017).固结粉胶凝材料开发与胶结充填体强度试验.河海大学学报. 自然科学版,45(1),69-76. |
MLA | 杨志强,et al."固结粉胶凝材料开发与胶结充填体强度试验".河海大学学报. 自然科学版 45.1(2017):69-76. |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[杨志强]的文章 |
[高谦]的文章 |
[陈得信]的文章 |
百度学术 |
百度学术中相似的文章 |
[杨志强]的文章 |
[高谦]的文章 |
[陈得信]的文章 |
必应学术 |
必应学术中相似的文章 |
[杨志强]的文章 |
[高谦]的文章 |
[陈得信]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。