Arid
双向对冲流滴灌灌水器水力性能与消能效果
其他题名Hydraulic performance and energy dissipation effect of two-ways mixed flow emitter in drip irrigation
郭霖1; 白丹1; 王新端1; 何靖1; 周文2; 程鹏2
来源期刊农业工程学报
ISSN1002-6819
出版年2016
卷号32期号:17页码:77-82
中文摘要双向对冲流滴灌灌水器是1种可形成急转流、正反双向流、以及对冲混掺流等加大能量耗散效果的新型灌水器。为研究灌水器的水力性能以及流道几何参数对水力特性的影响,取灌水器几何参数作为因素,采用正交设计安排25组试验方案,开展水力性能测试,计算流道的局部损失系数,同时对正交试验结果进行直观和方差分析,建立几何参数与流态指数的回归模型。结果表明,灌水器流态指数为0.432~0.464,其水力性能良好。单元流道的局部损失系数为6.698~19.130,显示优越的消能效果。挡水件与分水件最大过水通道宽度对流态指数的影响最大。建立的几何参数与流态指数之间的回归模型R~2=0.94,且验证表明其估算值与试验值相对误差小于5%,可可靠地估算流态指数。研究可为双向对冲流滴灌灌水器水力性能预研和评估、结构优化提供参考。
英文摘要The two-ways mixed flow emitter is a new kind of drip irrigation emitter. The main energy dissipation mechanism is forming many kinds of flow patterns, such as sharp turn flow, two-ways flow and mixed flow to increase more local head loss and eliminate extra inlet pressure. These flow patterns are produced by dividing water device and blocking water device in the flow channel. This structure can enhance the effect of dividing flow, sudden shrinkage, and sudden enlargement of flow channel section. In order to study the hydraulic performance and the effects of geometric parameters on hydraulic characteristic, we arranged 25 experimental schemes according to the orthogonal experimental design method with flow index as evaluation criteria. Five key geometric parameters (distance between dividing water device and flow channel side wall, distance between blocking water device tooth and dividing water device, distance between blocking water device and flow channel side wall, maximal flow channel width of blocking water device and dividing water device, bottom pillar height of blocking water device) were chosen and to flow rate and flow index under different pressures were determined. Laboratory experiments were carried out in State Key Laboratory Base of Eco-hydraulic Engineering in Arid Area, Xi’an University of Technology. Each experimental scheme was set 5 repeats by using high-precision engraving technology and average flow rate was taken to ensure the accuracy of results. Based on the flow rate of each experimental scheme, the flow index was obtained by using multivariable regression method. At the same time, the local loss coefficient of unit flow channel was calculated on the basis of hydraulic theory. In addition, the results of orthogonal experiment were analyzed with intuitive analysis and variance analysis. Then the regression model between geometric parameters and flow index was built. The results showed that the logarithm of flow rate had a good linear relationship with the logarithm of inlet pressure (R~2=0.998-0.999). Based on the relationship, the flow index for the experiment ranged from 0.432 to 0.464, indicating excellent hydraulic performance. The local loss coefficient of unit flow channel was in the range from 6.698-19.130. The energy dissipation effect of two-ways mixed flow emitter was obviously improved compared with the traditional flow channel structure with local loss coefficient of 2.1-4.8. Among the 5 geometric parameters, the maximal flow channel width between blocking water device and dividing water device was the most important influential factor for the flow index, and followed by the distance between dividing water device and flow channel side wall, the bottom pillar height of the blocking water device, the distance between blocking water device tooth and dividing water device. And the effect of these factors on the flow index was significant. However, the distance between blocking water device and flow channel side wall did not significantly affect the flow index. And the regression equation based on the parameters and flow index was well established with R~2 of 0.94 (P<0.01). The regression model was verified using the hydraulic experiments with the other three groups of structure parameters. The relative error of estimated and experimental flow index was from -0.46% to 1.17%, which verified the accuracy and reliability of the regression model. These conclusions can provide theoretical evidence for structure design, pre-research and evaluation of hydraulic performance of two-ways mixed flow emitter.
中文关键词消能 ; 结构 ; 流速 ; 滴灌灌水器 ; 工作机理 ; 几何参数 ; 局部水头损失
英文关键词energy dissipation structure flow rate drip irrigation emitter working mechanism geometric parameters local head loss
语种中文
国家中国
收录类别CSCD
WOS类目AGRICULTURAL ENGINEERING
WOS研究方向Agriculture
CSCD记录号CSCD:5799771
资源类型期刊论文
条目标识符http://119.78.100.177/qdio/handle/2XILL650/234626
作者单位1.西安理工大学水利水电学院, 西安, 陕西 710048, 中国;
2.华北水利水电大学水利学院, 郑州, 河南 450011, 中国
推荐引用方式
GB/T 7714
郭霖,白丹,王新端,等. 双向对冲流滴灌灌水器水力性能与消能效果[J],2016,32(17):77-82.
APA 郭霖,白丹,王新端,何靖,周文,&程鹏.(2016).双向对冲流滴灌灌水器水力性能与消能效果.农业工程学报,32(17),77-82.
MLA 郭霖,et al."双向对冲流滴灌灌水器水力性能与消能效果".农业工程学报 32.17(2016):77-82.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[郭霖]的文章
[白丹]的文章
[王新端]的文章
百度学术
百度学术中相似的文章
[郭霖]的文章
[白丹]的文章
[王新端]的文章
必应学术
必应学术中相似的文章
[郭霖]的文章
[白丹]的文章
[王新端]的文章
相关权益政策
暂无数据
收藏/分享

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。