干旱区生态环境知识资源中心

The phenomenon of track rigidity in desert areas due to sand dune movement and ballast contamination is one of the most important causes of ballasted railway track degradation and consequently increase in train-induced vibrations. In addition to looking at the existing methods for reducing the track rigidity such as using ballast mat and installing the under sleeper pad, this paper focuses on evaluating the dynamic behavior of railway track including ballast mixed with tire-derived aggregate in a field study. Based on prior laboratory tests done by the authors and latest researches, 10 volume percentages of tire-derived aggregate were adopted as maximum suitable amount to be mixed with ballast for decreasing the track rigidity and increasing its damping property maintaining the basic ballasted track capabilities. In this regard, in a test track located in central desert of Iran in Bafgh-Jandagh railway route, the ballast was mixed with 0, 5 and 10% of tire-derived aggregate by tamping machine in three different sections with 20m lengths. Moreover, another test section in the same route with fully fouled ballast was considered as a critical bench mark. Many tests were carried out on the mentioned sections using impact test method. In the next stage, the operational modal analysis method was utilized to achieve the tested sections’ mode shapes, natural frequencies and damping ratios as well as geometrical attenuation from the recorded responses. By knowing the modal properties, numerical models of tracks were developed, and the effect of tire-derived aggregate as well as fouling on track stiffness was evaluated.