干旱区生态环境知识资源中心

An environmental impact assessment of a landfarming process, which was performed at an actual petroleum-contaminated site, was conducted using a green and sustainable remediation (GSR) tool in this study. The landfarming process was divided into four stages: site preparation, installation, system operation, and system dismantling/waste disposal. The environmental footprints of greenhouse gas (GHG) emissions, water consumption, total energy usage, and air pollutants (SOx. NOx, and PM10) were analyzed. GHG emissions and water consumption were approximately 276 metric tons and 7.90E+05 gal, respectively, in stage III, where they were the highest due to the consumables and equipment use in the system operation. Total energy usage had the highest value of 1.54E+03 MMBTU in stage II due to material production. The SO, and NO, emissions primarily occurred in stages 1 and II due to energy usage. The PM10 was mostly emitted in stages 1 and 111 and was associated with heavy use of equipment. To reduce the environmental footprints, biodiesel and sunlight were suggested as alternatives in this study. The GHG and SOx emissions decreased to 1.7 and 4.4E-04 metric tons, respectively, on the basis of total emissions with a 1 % increase in biodiesel content, but the NOx emissions increased to 5.6E-03 metric tons. If sunlight was used instead of electricity, the GHG and NOx emissions could be reduced by as much as 79 and 84 %, respectively, and the SO, emissions could also be reduced.