干旱区生态环境知识资源中心

The Soil and Water Assessment Tool (SWAT) was used to simulate the transport of runoff and sediment into the Miyun Reservoir, Beijing in this Study. The main objective was to validate the performance of SWAT and the feasibility of using this model as a Simulator of runoff and sediment transport processes at a catchment scale in and and semi-arid area in North China, and related processes affecting water quantity and soil erosion in the catchment were simulated. The investigation was conducted using a 6-year historical streamflow and sediment record from 1986 to 1991; the data front 1986 to 1988 was used for calibration and that from 1989 to 1991 for validation. The SWAT generally performs well and could accurately simulate both daily and monthly runoff and sediment yield. The simulated daily and monthly runoff matched the observed values satisfactorily, with a Nash-Sutcliffe coefficient of greater than 0.6, 0.9 and a coefficient of determination 0.75, 0.9 at two outlet stations (Xiahui and Zhangjiafen stations) during calibration. These values were 0.6, 0.85 and 0.6, 0.9 during validation. For sediment simulation, the efficiency is lower than that for runoff. Even so, the Nash-Sutcliffe coefficient and coefficient of determination were greater than 0.48 and 0.6 for monthly sediment yield during calibration, and these values were greater than 0.84 and 0.95 during validation. Sensitivity analysis shows that sensitive parameters for the simulation of discharge and sediment yield include curve number, base flow alpha factor, soil evaporation compensation factor, soil available water capacity, soil profile depth, surface flow lag time and channel re-entrained linear parameter, etc. Copyright (C) 2009 John Wiley & Sons, Ltd.