干旱区生态环境知识资源中心(Arid): Analysis of tensile strength of AA 2014 and AA 7075 dissimilar metals using friction stir welding

Arid

DOI	10.1016/j.matpr.2020.04.895
	Analysis of tensile strength of AA 2014 and AA 7075 dissimilar metals using friction stir welding
	Sivaraman, P.; Nithyanandhan, T.; Karthick, M.; Kirivasan, S. M.; Rajarajan, S.; Sundar, M. Sivanesa
通讯作者	Sivaraman, P (corresponding author), Sri Krishna Coll Technol, Fac Mech Engn, Kovaipudur, Tamil Nadu, India.
会议名称	International Conference on Newer Trends and Innovations in Mechanical Engineering (ICONTIME) - Materials Science
会议日期	OCT 15-16, 2020
会议地点	ELECTR NETWORK
英文摘要	The Friction stir welding (FSW) process is a strong state joining process and the joining temperature is lower than that utilized in the combination welding forms. In this manner, for different metal welding, FSW is considered to offer a few focal points over combination welding. This study deals with the present examination centers around the impacts on tensile strength due to material position and device rotational speed. Material AA2014 and AA7075 material alloy are chosen for the welding process. The welded aluminum compounds are of a thickness of 6.0 mm in utilizing a traditional processing machine. Three sets of joints were created by fluctuating device rotational velocities and by changing the fixed situation of the material on the progressing and withdrawing sides. The outcomes show that the greatest rigidity of 207 MPa was accomplished for Sample C when AA7075 aluminum amalgams were set on the propelling side at a rotational speed of 1000 rpm with consistent surface appearance and no inward deformity over the weld zone, while the most reduced elasticity of 160 MPa was obtained for sample A when AA7075 was put on the other side with serious passage deserts over the weld region adding to split spread. In this paper we will be analyzing the results using taguchi method. (C) 2020 Elsevier Ltd. All rights reserved.
英文关键词	Friction stir welding Rotational speed Aluminum alloys Tensile strength Taguchi method
来源出版物	MATERIALS TODAY-PROCEEDINGS
ISSN	2214-7853
出版年	2021
卷号	37
页码	187-192
出版者	ELSEVIER
类型	Proceedings Paper
语种	英语
收录类别	CPCI-S
WOS记录号	WOS:000624316000030
WOS类目	Materials Science, Multidisciplinary
WOS研究方向	Materials Science
资源类型	会议论文
条目标识符	http://119.78.100.177/qdio/handle/2XILL650/353152
作者单位	[Sivaraman, P.; Nithyanandhan, T.] Sri Krishna Coll Technol, Fac Mech Engn, Kovaipudur, Tamil Nadu, India; [Karthick, M.; Kirivasan, S. M.; Rajarajan, S.; Sundar, M. Sivanesa] Sri Krishna Coll Technol, Mech Engn, Coimbatore, Tamil Nadu, India
推荐引用方式 GB/T 7714	Sivaraman, P.,Nithyanandhan, T.,Karthick, M.,et al. Analysis of tensile strength of AA 2014 and AA 7075 dissimilar metals using friction stir welding[C]:ELSEVIER,2021:187-192.